»Tutorials - »Other Pretty Things Tutorials - Czech Button Filigree Ring

Czech Button Filigree Ring


1 Trinity Brass filigree Swirl cross 44mm
1 Trinity Brass filigree Scrolled ring
1 Trinity Brass dramatic finger ring
1 18mm Czech glass button
Flat-nose pliers
Round-nose pliers
Wire cutters
E6000 glue

Materials are available at wwww.beadsonline.com.au


Step 1
Take the Czech button and using your wire cutters remove the wire shank. Glue the button to centre of the back of the Swirl Cross Filigree (make sure the raised shiny side is on the out side).

Step 2
Take 1 x scrolled filigree ring and sit it above so it frames the Czech button. Using your hand gently wrap the stem of the Swirl filigree cross around the Scrolled ring and filigree making sure it sit snuggle inside. Secure by crimping the hands of the cross with your flat nose pliers.

Step 3
Using a generous amount of e6000 glue to the ring base. Check in 5 minutes to make sure that everything is sitting properly. Allow to dry for 48 hours before wearing.